All Certificate Types

A CP12 certificate — officially called a Landlord Gas Safety Record — is the legal document confirming that all gas appliances, fittings, and flues in a rental property have been checked by a Gas Safe registered engineer.

A Gas Service & Maintenance Record documents the annual service of a single gas appliance such as a boiler, fire, or cooker.

A Central Heating System Cleansing Certificate confirms that a central heating system has been flushed, cleaned, and treated in accordance with BS 7593:2019.

A Gas Boiler Commissioning Record — commonly known as the Benchmark certificate — is issued when a new gas boiler is installed and commissioned.

A HETAS Certificate of Compliance is issued when a solid fuel appliance (wood burner, multi-fuel stove, biomass boiler) has been installed by a HETAS-registered installer.

A Solid Fuel Appliance Service Record documents the annual service and inspection of wood burners, multi-fuel stoves, open fires, and biomass boilers.

An OFTEC Installation Certificate confirms that an oil-fired heating appliance (boiler, range cooker, or AGA) has been installed by an OFTEC-registered technician in compliance with Building Regulations.

An Oil Appliance Service Record documents the annual service and inspection of oil-fired heating appliances — boilers, range cookers, and AGAs.

A Chimney Sweeping Certificate confirms that a chimney or flue has been swept and inspected by a qualified chimney sweep.

A Waste Transfer Note must accompany any transfer of controlled waste between parties.

An Asbestos Management Survey identifies the presence, location, and condition of asbestos-containing materials (ACMs) in a building during its normal use.

An Asbestos Refurbishment and Demolition Survey is a more intrusive survey carried out before any building work that could disturb asbestos-containing materials.

A Certificate of Reoccupation (also called a 4-Stage Clearance Certificate) confirms that an area is safe to reoccupy after asbestos removal work.

A Building Regulations Completion Certificate is issued by the local authority or an approved inspector when building work has been completed and complies with the Building Regulations.

A Regularisation Certificate is issued by the local authority when building work that should have had Building Regulations approval is inspected and found to be satisfactory retrospectively.

An F10 Notification is the formal notification to the HSE that a construction project is taking place.

A Construction Phase Plan sets out the health and safety arrangements for managing a construction project.

The Health & Safety File contains information about the building that will be needed for future construction work, maintenance, or demolition.

An SSIP (Safety Schemes in Procurement) Certificate confirms that a contractor meets a defined standard of health and safety competence.

A LOLER Thorough Examination Certificate confirms that lifting equipment has been thoroughly examined by a competent person in accordance with the Lifting Operations and Lifting Equipment Regulations 1998.

An NHBC Buildmark Warranty provides structural defect cover for new homes for up to 10 years.

An LABC Warranty provides structural defect insurance for new homes, similar to NHBC Buildmark.

A Planning Permission Decision Notice is the formal document from the local planning authority granting (or refusing) permission for development.

Listed Building Consent is required for any work that would affect the character of a listed building, including both internal and external alterations.

A Damp & Timber Treatment Guarantee is issued by a PCA (Property Care Association) member company after carrying out damp-proofing, timber treatment, or woodworm treatment.

A Radon Test Report records the measured radon gas levels in a building.

A COMCAT certificate confirms that commercial catering gas equipment (ovens, fryers, griddles, combi ovens, etc.

An Electrical Installation Certificate (EIC) is issued when new electrical work is completed, such as a new circuit, consumer unit replacement, or rewire.

A Minor Electrical Installation Works Certificate covers small additions or alterations to an existing electrical circuit — such as adding a socket, replacing a light fitting, or extending a ring main.

An Electrical Installation Condition Report (EICR) — formerly known as a Periodic Inspection Report (PIR) — assesses the safety and condition of an existing electrical installation.

A PAT Testing Certificate records the results of portable appliance testing — the inspection and electrical testing of plug-in equipment to ensure it is safe to use.

An Energy Performance Certificate (EPC) rates the energy efficiency of a building from A (most efficient) to G (least efficient).

An Air Pressure Test Certificate (also called an Air Tightness Test) records the measured air permeability of a building envelope.

A Ventilation Commissioning Certificate confirms that a mechanical ventilation system (MVHR, MEV, or individual extract fans) has been installed and commissioned in accordance with Building Regulations Approved Document F.

An MCS Installation Certificate confirms that a renewable energy system (solar PV, solar thermal, heat pump, or biomass) has been installed by an MCS-certified installer.

A Sound Insulation Test Certificate records the measured sound insulation performance of walls and floors between dwellings.

A SAP (Standard Assessment Procedure) or RDSAP (Reduced Data SAP) assessment calculates the energy performance of a dwelling.

An EV Charging Point Installation Certificate confirms that an electric vehicle charger has been installed safely and in compliance with BS 7671 (IET Wiring Regulations) and IET Code of Practice for EV Charging.

A Data Cabling Installation Certificate confirms that structured cabling (Cat5e, Cat6, Cat6a, fibre optic) has been installed and tested to the relevant standards.

A Lightning Protection Test Certificate records the results of testing a lightning protection system (LPS) in accordance with BS EN 62305.

An Unvented Hot Water Storage Vessel Commissioning Record confirms that an unvented cylinder (such as a Megaflo, Heatrae Sadia, or OSO) has been installed and commissioned by a G3-qualified installer in accordance with Building Regulations Approved Document G3.

A Water Regulations Compliance Certificate confirms that plumbing work has been carried out in accordance with the Water Supply (Water Fittings) Regulations 1999.

A Legionella Risk Assessment identifies and evaluates the risk of Legionella bacteria in a building's water system.

A Scaffold Handover Certificate confirms that a scaffold has been erected, inspected, and is safe for use.

A Scaffold Inspection Report records the results of a periodic inspection of an erected scaffold.

A Drainage Compliance Certificate confirms that drainage work has been carried out in accordance with Building Regulations Approved Document H.

A Build Over Agreement is required when building work takes place over or near a public sewer.

A Roofing Compliance Certificate confirms that roofing work has been carried out by a Competent Person Scheme (CPS) registered contractor in compliance with Building Regulations.

A Party Wall Notice is a formal notification that must be served on neighbouring property owners before carrying out certain building works near a shared boundary or party wall.

A Party Wall Award is a binding legal document drawn up by party wall surveyors when neighbours cannot agree on proposed building work near a party wall.

A FENSA Certificate confirms that replacement windows, doors, or roof windows have been installed by a FENSA-registered installer in compliance with Building Regulations.

A CERTASS Certificate serves the same purpose as a FENSA certificate — confirming that replacement windows or doors comply with Building Regulations.

A WaterSafe Certificate of Work Completed confirms that plumbing work has been carried out by a WaterSafe approved plumber in compliance with the Water Supply (Water Fittings) Regulations 1999.

An RPZ (Reduced Pressure Zone) valve test certificate confirms that a backflow prevention device has been tested and is functioning correctly to prevent contamination of the public water supply.

A Rainwater Harvesting Installation Certificate confirms that a rainwater collection and reuse system has been installed in compliance with BS 8515 and the Water Supply (Water Fittings) Regulations.

A Greywater Recycling System Certificate confirms that a greywater treatment and reuse system has been installed in compliance with BS 8525 and the Water Supply (Water Fittings) Regulations.

An Underfloor Heating Commissioning Certificate records the pressure testing, flow balancing, and commissioning of an underfloor heating (UFH) system.

A Fire Risk Assessment is a legal requirement for all non-domestic premises and the common areas of residential buildings with shared corridors, stairways, or entrances.

A Fire Alarm Installation Certificate confirms that a fire alarm system has been installed and commissioned in accordance with BS 5839.

An Emergency Lighting Certificate confirms that an emergency lighting system has been installed and tested in accordance with BS 5266.

A Smoke & Heat Alarm Certificate confirms that smoke alarms and heat alarms have been correctly installed and tested in a property.

A Carbon Monoxide Alarm Certificate confirms that CO alarms have been installed and tested in a property.

A Fire Sprinkler Installation Certificate confirms that an automatic fire sprinkler system has been designed, installed, and commissioned in accordance with BS 9251 (residential) or BS EN 12845 (commercial/industrial).

A Fire Door Installation Certificate confirms that fire doors have been correctly installed in accordance with BS 8214 and the manufacturer's specifications to achieve their rated fire resistance (FD30, FD60, etc.

A Fire Stopping & Compartmentation Certificate confirms that fire stopping measures (intumescent sealants, fire batts, fire collars, fire sleeves) have been correctly installed to maintain the fire resistance of compartment walls and floors.

A Fire Extinguisher Service Certificate confirms that portable fire extinguishers have been inspected, serviced, and maintained in accordance with BS 5306-3.

An MCS (Microgeneration Certification Scheme) Installation Certificate for Solar PV confirms that a photovoltaic panel system has been designed and installed by an MCS-certified installer in accordance with MCS standards, IET Code of Practice for Grid Connected Solar PV, and BS 7671.

An MCS Installation Certificate for Heat Pumps confirms that an air source or ground source heat pump has been designed and installed by an MCS-certified installer.

A Ground Source Heat Pump Borehole Certificate records the drilling, installation, and commissioning of ground loop boreholes for a ground source heat pump system.

A Biomass Boiler Service Certificate records the annual service of a biomass (wood pellet, wood chip, or log) boiler.

A Septic Tank Installation Certificate confirms that a septic tank or sewage treatment plant has been installed in compliance with the Environment Agency general binding rules, BS 6297, and Building Regulations Part H.

A Confined Space Entry Permit is a formal document authorising entry into a confined space (tanks, vessels, chambers, sewers, excavations) and recording the safety precautions taken.

A Thermographic Inspection Certificate records the findings of a thermal imaging survey of a building or electrical installation.

An F-Gas Installation & Commissioning Certificate confirms that a refrigeration or air conditioning system containing fluorinated greenhouse gases has been installed and commissioned by a qualified F-Gas certified engineer.

An Air Conditioning Commissioning Report records the testing and commissioning of an air conditioning system to confirm it meets the design specification.

A TR19 Kitchen Extraction Cleaning Certificate confirms that commercial kitchen extract ductwork has been cleaned to the standard required by TR19 (BESA Guide to Good Practice for Internal Cleanliness of Ventilation Systems).

A Local Exhaust Ventilation (LEV) Test Certificate records the results of a thorough examination and test of an LEV system used to control exposure to hazardous substances (dust, fumes, vapours).

An Intruder Alarm Installation Certificate confirms that a burglar alarm system has been installed and commissioned in accordance with BS EN 50131 and PD 6662.

A CCTV System Installation Certificate confirms that a video surveillance system has been installed in accordance with BS EN 62676 and BS 8418 (for monitored systems).

An Access Control System Installation Certificate confirms that an electronic access control system (card readers, biometrics, intercom) has been installed and commissioned.

An NRSWA Street Works Completion Certificate confirms that street works (utility installations, road openings, reinstatements) have been completed in accordance with the New Roads and Street Works Act 1991, the Specification for the Reinstatement of Openings in Highways (SROH), and the relevant highway authority requirements.

A Temporary Works Certificate confirms that temporary works (formwork, falsework, propping, shoring, temporary access structures) have been designed, checked, and erected in accordance with BS 5975.

A CIGA (Cavity Insulation Guarantee Agency) guarantee is a 25-year independent guarantee covering cavity wall insulation installations.

An Insulation Installation Certificate confirms that thermal insulation (cavity wall, loft, external wall, floor, or roof) has been installed in compliance with Building Regulations Part L and the relevant British Standards.

A Playground Installation & Inspection Certificate confirms that playground equipment has been installed or inspected in compliance with BS EN 1176 (playground equipment safety) and BS EN 1177 (impact-attenuating surfacing).

A Tree Surgery Work Completion Certificate records the arboricultural work carried out on trees, confirming compliance with BS 3998 (Recommendations for Tree Work).

A Flooring Installation Guarantee confirms that floor covering (carpet, laminate, vinyl, LVT, wood, tiles) has been installed in accordance with BS 8203 (resilient floor coverings) or BS 8201 (textile floor coverings).

A Roller Shutter Installation Certificate confirms that a roller shutter, sectional overhead door, or security grille has been installed in accordance with EN 13241 (industrial, commercial and garage doors) and the Machinery Directive.